Item Specification:  

Product Features:

• The iPad 3 digitizer involves a touch screen with a flex ribbon cable. As an important connecting cable between the logic board and the LCD screen, the ribbon cable performs a mission of data transfer. Therefore, many abnormal display issues may be caused by the flex ribbon cable or relative factors, such as cracked cable, poor contact.
• The iPad 3 digitizer is available in at least two levels of condition: original and third party. Phonelcdwholesale supplies the thirty part level for the iPad 3 digitizer with the almost identical quality with the original one. In addition, two colors can be chosen for the touch screen.

      Comparison between iPad 3 and its predecessor:

        Up: iPad 3; down: iPad 2

      1. The display connector in the iPad 3(up) is different from the one in iPad 2(lower), making the two displays incompatible with each other.

      Up:  Rear camera; down: front camera

      2. As with iPad 2, iPad 3 has a 0.3 MP VGA-quality front camera but varies with a more advanced 5MP 1080p HD rear camera instead of a 0.7 MP 720p HD camera on iPad 2.

 Installation Guideline/Tips:

• Try not to peel the LCD ribbon label completely off the rear case ,but use the flat end of the spudger to slowly release the adhesive securing the cable.
• Pay attention to the front facing camera located at the middle of the iPad when sliding the plastic opening tool along the top edge.
• Important Notes: Replacement of the iPad 3 digitizer requires someone who has professional skills with cell phone teardown.